Mercruiser Sterndrive 4.3L MPI 180 HP - MERCRUISER MULTIPORT INJECTED (MPI) STERNDRIVE ENGINES
The MPI system fine-tunes the fuel-to-air mixture in the combustion chamber, delivering ultra-smooth operation from idle to wide-open throttle. Mercury’s engineers achieved outstanding Noise / Vibration / Harshness (NVH) levels in the 4.3L. Power steering is standard, providing you complete and effortless control.
| HP / kW | |
|---|
| Maximum RPM (WOT) | |
|---|
| Engine type | |
|---|
| Displacement (L) | |
|---|
| Bore and stroke | - 4.00 x 3.48 / 101 x 88 mm
|
|---|
| Compression ratio | |
|---|
| Fuel requirement | |
|---|
| Fuel delivery system | - Multi-point Electronic Fuel Injection (MPI)
|
|---|
| Air induction | - Two-piece long runner intake with 75 mm throttle body
|
|---|
| Ignition | - Crank fired high voltage switch with knock control
|
|---|
| Alternator amp / Watt | |
|---|
| Water drain system | - Single point manual drain
|
|---|
| Exhaust system | - Iron manifolds with electro-deposition paint coated dry joint exhaust elbow
|
|---|
| Cooling system | |
|---|
| Accessory drive system | |
|---|
| Recommended oil | - NMMA Certified FCW 25W-40 Synthetic Blend
|
|---|
| Engine guardian system | - High coolant temperature
- Knock control
- Low drive lubricant
- Low oil pressure
- Low voltage
- Over-rev
|
|---|
| Dimensions (L x W x H) | - 28 x 30 x 22" / 696 x 740 x 559 mm
|
|---|
| Weight (engine only) | |
|---|
| Compatible drives | |
|---|
Specification
Engine 1
| Engine Make |
Mercruiser |
| Horse Power |
180 |